Blog

Multimode Synchronisation

Multimode Synchronisation

Tuesday, November 17, 2026

Synchronising multiple frequency eye safe illumination with machine vision cameras to achieve detailed sequenced imaging.

PSI imaging systems operate on the core principle that no component functions in isolation. To support this approach, all of our camera and lighting units feature multimode synchronisation capabilities. Units can operate as masters, slaves, or simultaneously in both roles, facilitating the execution of highly complex image acquisition sequences.

NIR Synchronisation Method

Consider an application requiring image capture of the top and four sides of an item moving along a conveyor belt. To prevent operator discomfort, each image is captured using a brief, high-intensity Near-Infrared (NIR) flash. Independent, asynchronous camera triggering leads to flash interference between units and inconsistent image quality. Similarly, simultaneous camera triggering causes opposing flash systems to interfere with one another.

Our system resolves this by designating one camera as the master and the remaining units as slaves:

  1. The slave cameras are primed for image capture and await an external trigger signal.
  2. When the master camera is instructed to capture an image, it signals its exposure status to the next camera in the chain.
  3. Subsequent cameras can be set to expose immediately or wait until the preceding unit finishes exposing. The latter configuration ensures sequential exposure down the chain.
  4. Status signals cascade from slave to slave, triggering rapid sequential exposures governed solely by exposure duration rather than data transfer speeds.
  5. Lighting units are configured as slaves to their corresponding cameras.

Visible Light Synchronisation Method

Where machine vision based colour analysis is required, so is suitable visible illumination. While effective for NIR, pulsed illumination presents challenges with visible light due to human perception of flicker and potential stroboscopic effects. In operator-populated environments, an alternative configuration is essential:

  1. A visible light unit is designated as the master, operating continuously in free-run mode at a frequency exceeding 80 Hz.
  2. Slave lighting units are configured sequentially in the same chain architecture. To human observers, the setup appears as six steady illumination sources, though they flash sequentially.
  3. Cameras operate in slave mode, with each triggered by its designated light source. Every camera captures the target illuminated strictly by its corresponding light while all other lights remain off.

Advanced Control & Flexibility

In addition to trigger sequencing, each light receives a high-speed 4-bit control code. This enables frame-by-frame brightness adjustments, allowing a single camera to manage multiple lights and capture consecutive images under distinct illumination parameters. Delivered as standard configurable functionality, this capability provides exceptional adaptability for complex multi-camera deployments.

Contact us to learn more

For further information on our range of products and services please contact our team by clicking on the below link
Search